Flintec DAD 141.1 Modbus Communication Manual do Utilizador descarregar pdf (Página 8)

DAD 141.1 Technical Manual Modbus Communication, Rev. 2.3 - Juni 2014 Page 8

The values of the update rate are 0 to 7 (2 exp 0 = 1, 2 exp 7 = 128).

see also command description: UR Update Rate

2122

Int32

Zero Tracking

This Index enables or disables the zero tracking (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2122.

The values of Zero Tracking function are 0 to 255.

see also command description: ZT Zero Tracking

2128

Int32

Analog Output

Mode

This Index is used for set the analog output mode.

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2128.

The values of the output mode are 0 to 5

see also command description: AM Analog Output Mode

2200

Int32

Absolute Gain

Calibration

This Index Reads/Modify the absolute gain point (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2200.

see also command description: AG Absolute Gain

2202

Int32

Absolute Zero

Calibration

This Index Reads/Modify the absolute zero point (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2202.

see also command description: AZ Absolute Zero

2204

Int32

Calibrate Enable

This Index sets the calibration functions to the enabled state.

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2204.

see also command description: CE Calibrate Enable

2206

Int32

Calibrate Gain

This Index sets the calibration gain (span) value (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2206.

see also command description: CG Calibrate Gain

220C

Int32

Calibrate Max

This Index Reads/Modify the maximum allowable output value (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 220C.

see also command description: CM Maximum Output

220E

Int32

Calibrate Min

This Index Reads/Modify the minimum allowable output value (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 220E.

see also command description: CI Minimum Output

2212

Int32

Calibrate Zero

This Index sets the calibration zero point (TAC protected).

The 32 bit integer data accessed by writing 2 16-bit registers from index 2212.

see also command description: CZ Calibrate Zero

2214

Int32

Decimal Point

This Index Reads/Modify the decimal point position (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2214.

see also command description: DP Decimal Point

Index (hex)

Type

Size

Access

Function

Description

2216

Int32

Display Step

Size

This Index Reads/Modify the the display step size (TAC protected).

The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2216.

see also command description: DS Display Step Size

1 2 3 4 5 6 7 8 9 10

Comentários a estes Manuais

Sem comentários

Flintec DAD 141.1 Modbus Communication Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flintec DAD 141.1 Modbus Communication